IP Network Solutions
The IPMG-1 (IP Multimedia Gateway) is a member of a series of
products that provides the functionality to monitor, control and respond
to a number of emergency related events such as Fire, Security and
Mass Notification. With its leading edge DSP technology, this compact
module integrates distributed Audio, Video, network control and indication
on a single board. With the combined integrated functionality, interfaces
and logic based SYSNOVA script language programming this module can
support a host of new and existing applications.
to a number of emergency related events such as Fire, Security and
Mass Notification. With its leading edge DSP technology, this compact
module integrates distributed Audio, Video, network control and indication
on a single board. With the combined integrated functionality, interfaces
and logic based SYSNOVA script language programming this module can
support a host of new and existing applications.
IPMG-1
Designed with the latest switch -mode power supply technology, the PSD-1
provides the IPMG-1 and all of this series of modules distributed 12V
regulated power. There are 2 available outputs each rated at 2 amps. One
of the outputs which is normally used to power an external router can be
adjusted to deliver a range between 9 VDC and 16VDC. In addition the
PSD-1 includes an on board supervised battery charger that can charge
up to 35 AH batteries.The functions of this module as with all of this series
modules is supervised by the IPMG-1 through a serial I2C interface.
of the outputs which is normally used to power an external router can be
adjusted to deliver a range between 9 VDC and 16VDC. In addition the
PSD-
modules is supervised by the IPMG-
The INP-1 provides the IPMG-1, through the use of an internal I2C bus
interface,the ability to monitor up to 8 dry contact inputs. The state of the
inputs can be individually monitored by on board LED’s. An array of dip
switches can be used to set the module address.
inputs can be individually monitored by on board LED’s. An array of dip
switches can be used to set the module address.
The RLY-4 provides the IPMG-1,through the use of an internal I2C bus
interface,the ability to control up to 4 Form C relays.The state of the relay
outputs can be individualy monitored by on board LED’s.
outputs can be individualy monitored by on board LED’s.
The RLY-8 provides the IPMG-1,through the use of an internal I2C bus
Interface, the ability to control up to 8 Form C relays. The state of the
Relay outputs can be individually monitored by on board LED’s.An array
of dip switches can be used to set the module address.
Relay outputs can be individually monitored by on board LED’s.An array
of dip switches can be used to set the module address.
The PD-8 provides the PSD-1 the ability to distribute 12V DC power to
Up to 8 Individually PTC protected outputs. Each output is rated at
1 Amp.These outputs are normally used to power external 12V dc cameras
and peripherals.
1 Amp.These outputs are normally used to power external 12V dc cameras
and peripherals.
PSD-1
INP-8
RLY-4
RLY-8
PD-8
GPSR-1
CAB-1
